How to Easily Put On an RV Cover?

What’s better than the feeling of taking your RV to explore the beautiful natural landscapes? We know that you love to go on adventures in your RV, but it’s also important to know how to take proper care of it.

Using an RV Cover is a great way to protect your RV from any natural threat. But, installing a motorhome Cover can sometimes be challenging. So, here’s a comprehensive guide on how to put on RV cover to make your job easier.

Getting Ready for RV Cover Installation

You must perform these pre-checks before covering your RV to ensure proper installation of the cover and protect your RV and yourself from potential damage.

1. Select the Correct Size Cover

Start by measuring your RV from front to back. Also, include the side mirrors in the front, to the accessories (spare tire, ladders, and so on) in the rear. This will help you get the exact size of the cover needed to cover your RV.

2. Wash Your RV

Clean your RV properly before installing the cover. This practice minimizes the risk of black streak development after the cover is installed. Moreover, this practice also prolongs the life of your RV Cover.

3. Pad Sharp Edges

Padding rain gutters, steps, ladders, and other abrasive corners helps in reducing the risk of tears or punctures. Some covers come with padding, but you’ll have to purchase it separately if your cover is not already padded.

4. Use RV Cover Assist Poles

Consider using RV cover assist poles to make the installation process easier. These poles help lift and position the cover over your RV, allowing for a smoother and more efficient installation. 

How to Put on RV Cover by Yourself?

You are now aware with the pre-installation preparation, it’s time to cover your RV. You just need to follow these simple steps to learn how to put on RV cover by yourself.

Step 1: Find the front and back of the cover

Once you’re done with the prep, unwrap the cover and lay it on the ground. Look for the labels carefully to find out the front and back of the cover, so you don’t get frustrated halfway.

Step 2: Climb onto the roof safely

Safety is the key! Make sure to use a strong ladder, to climb the roof. And, don’t forget to take your time to create a good balance.

Step 3: Position the Cover

As you’ve climbed the roof, spread out the front of the cover. Unfold the cover slowly and walk backward of the RV as you go. Consider working in small sections to ensure that the cover doesn’t get tangled or stuck.

Step 4: Drape the Sides Over the RV 

Once, you have the top part in place, let the sides drape over the edges. Gently pull the cover down by walking along the edges of the roof. Take your time for this step to ensure the cover stays even and doesn’t get bunched up or stuck on anything. This will help you install the cover smoothly.

Step 5: Secure the Cover

Congratulations! You’ve successfully positioned the cover on the roof. And, now it’s time to secure your RV Cover. Most RV covers feature straps and buckles designed to go under the RV. So, you’ll need to climb down and tighten the straps from every side. These straps prevent the cover from blowing off in the wind.

Step 6: Adjust for a Snug Fit

After completing the installation process take a final walk around your RV to check for any loose areas or gaps.

How to Install RV Cover Without Getting on the Roof?

Many often wonder, how to install RV Cover Without Getting on the Roof. Well, it’s completely possible. Moreover, it’s also crucial for RVs that don’t have a walkable roof, fixed ladder, or ladder prep. However, you’ll still require a ladder and assist pole to put on the RV Cover. Having a partner with you for this process is an advantage.

Start by unfolding the cover on the ground next to your RV. Then identify the front and back sides of the cover. Now, you’ll require a telescoping pole or a broom handle to lift the cover onto the top of the motorhome. Slowly drag the cover across the roof by guiding it with the pole. Take your time to position the cover evenly.

Once the cover is wrapped over the roof, walk around the RV and pull down the sides. Secure the cover using the provided straps and buckles, to ensure a snug fit without gaps. So, installing an RV Cover without getting on the roof is not as challenging as it may seem. You just need the right tools, equipment, and support from a partner.

How to Remove RV Cover?

Now, that you’ve learned how to put on RV cover, it’s time to know how to remove it. You’ll simply have to reverse the steps above. But here’s a quick breakdown to help you remove the RV Cover:

1. Open the straps and buckles underneath and on the front and back of your RV.

2. Pull the cover off the front and rear corners, bring the RV ladder, and pull up the back of the cover as you go.

3. Now, walk on top of the cover to the front of the RV. Avoid non-flat areas on the roof, such as AC units, roof vents, and satellite TV antennas.

4. Pull the front and sides of the cover onto the roof, turning the sides inside out as you go. You’ll be left with a strip of cover similar to the length of your RV’s roof.

5. Then, move to the rear of the roof and roll the cover from back to front, but leave the cover’s FRONT tag exposed at the end of the roll.

6. You can fold the cover into thirds for more compact storage and gently lower it to the ground over the front of your RV.

7. Store it inside the original storage bag and/or in your RV underneath storage.

How to Fold RV Cover?

Folding the RV Cover properly ensures it occupies less space and can be easily opened for further use. Below are the steps to fold it the right way.

1. Start with washing the cover. Once washed, let it dry completely to minimize the risk of mold.

2. Now, lay the RV Cover flat on clean ground (avoid laying on damp spaces). Fold the cover lengthwise and then sideways by taking the edges inward toward the center. If your RV Cover is bigger, you may need to do this in stages.

3. Some people may prefer to roll the cover by starting from one end and rolling the cover tightly toward the opposite end. However, rolling or folding the cover depends on individual preferences. You can choose any method you like.

4. Once, the RV Cover is folded or rolled, make sure to store it in the original storage bag if available. And, if you don’t have the original bag, you can also use a large plastic bin or a heavy-duty bag for storage. Storing the RV Cover securely will protect it from dirt and mold formation.

How to Measure Travel Trailer for Cover?

Measuring the travel trailer correctly ensures a proper fit for the RV Cover. Start by measuring the RV from the front bumper to the rear bumper (including any accessories). Now, measure the width (including the side-view mirrors) and then, measure the height of the RV from the ground to the top of the roof. This way you can find out what size of the cover would be perfect for your RV.

What is the Easiest Way to Cover an RV?

Consider, purchasing a durable RV cover that can withstand harsh weather conditions and natural elements. This will ensure that your RV stays protected year-round.

The RVFilluck Travel Trailer Cover is a great choice for your RV’s overall protection. Made from high-quality material, this cover is Tear-resistant and protects from UV Rays. Moreover, it also features 6 air vents to enhance the airflow. This RV Cover is also equipped with a roll-able zipper door and offers a snug fit. In the end, investing in a high-quality RV cover will prolong the life of your RV and will keep it in pristine condition.

Concluding Thoughts

In this blog, we’ve covered various aspects of how to put on motorhome cover. Sometimes, it could be quite challenging but with the right technique and approach, you can do it effortlessly and always stay ready for more adventures. You may also consider using the RVFilluck Travel Trailer RV Cover to provide year-round protection to your RV. Happy RVing!